Auto dial numbers and dialing options, Storing numbers for easy dialing, Auto dial numbers and dialing options -1 – Brother FAX-3800 User Manual
Page 74: Storing numbers for easy dialing -1
7 - 1
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
7
7
Auto Dial Numbers
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your FAX/MFC for easy dialing: One Touch (FAX models
only), Speed Dial and Groups for Broadcasting faxes.
Storing One Touch Dial Numbers (For FAX Models Only)
You can store 8 fax/phone numbers that you can dial by pressing one key (and
Fax Start). You also can store names with these numbers. When you press a
One Touch dial location, the LCD shows the name or number as the call is
dialed. (See
One Touch Dialing (For FAX Models Only)
One Touch keys are not the dial pad keys. They are the 4 keys (numbers 1 to 4)
located on the left.
Numbers 5 to 8 are accessed by holding down
Shift while you press the
appropriate One Touch key.
1
Press Menu/Set, 2, 3, 1.
2
Press the One Touch key where you want to store a number.
The LCD shows the location you selected.
3
Enter a number (up to 20 digits), and then press Menu/Set. If you want to enter
a pause in the dialing sequence (for example, to wait for an “outside line”), press
Redial/Pause as you’re entering digits. A dash appears on the LCD. Pressing
Redial/Pause enters a 3.5 second pause when the number is dialed.
4
Use the dial pad to then enter the name
(up to 15 characters), and then press
Menu/Set. You can use the chart on
page 4-2 to help you enter letters—OR—To store the number without a name,
press Menu/Set.
5
Return to Step 2 to store another One Touch number—OR—Press Stop/Exit.
When you dial an auto dial number, the LCD shows the name you’ve stored, or,
if you haven’t stored a name, the number you’ve stored.
If you loose electrical power, auto dial numbers in memory will
not
be lost.
(For USA Only) One-Touch key 1 has been pre-programmed for the Brother fax-
back system. One-Touch key 2 has been pre-programmed for the CallManage long
distance plan. You can override them if you wish.
Note
If you need to store a pause longer than 3.5 seconds, press Redial/Pause two
or more times.
Note
You can store Groups (for Broadcasting) on the One Touch keys.
1 . O N E - T O U C H D I A L
N A M E :