Rockwell Automation 13DJ3 Liquid Level Controls - Manual (Page 4)

4
Table 2: Probe Fittings
Table 3: Probe Rod Assemblies
Table 4: Spare Parts
Bulletin Number Description Rods or Wires Used Housing Material Fitting Pipe Thread
Maximum
Temperature
Maximum Pressure
psi
61BD1-1000 Probe fitting with rubber cap 1 None 1/2 in.
300°F
149°C
250 (1,724 kPa)
61LF1-1000
Probe fitting in cast enclosure
2 Bronze
1 in. 200 (1,378 kPa)
61LF1-1000M 316 Stainless Steel
61LJ2-1000
Two probe fittings in cast enclosure
Bronze 2 in. 250 (1,724 kPa)
61LJ2-1000 316 Stainless Steel 200 (1,378 kPa)
63GH1-1000
Special sanitary probe with 3 ft
(0.91 m) probe rod(s) supplied with
10 ft (3 m) cable and separable
connector
1
None
Fits 1 1/2 in. LAMD 13H nut for
#15 Union Ferrule
212°F
100°C
—
63GH2-1000 2
63GJ1-1000 1
Fits 2 in. LAMD 13H nut for
#15 Union Ferrule
63GJ2-1000 2
Bulletin Number Description
64CR1- 1000 316 Stainless Steel Probe Tip and 1/4 in. dia. x 12 in. (0.3 m) Probe Rod
64CR1- 1001 316 Stainless Steel Probe Tip and 1/4 in. dia. x 24 in. (0.61 m) Probe Rod
64CR1- 1002 316 Stainless Steel Probe Tip and 1/4 in. dia. x 36 in. (0.91m) Probe Rod
64CR1- 1003 316 Stainless Steel Probe Tip and 1/4 in. dia. x 48 in. (1.22 m) Probe Rod
64CR1- 1004 316 Stainless Steel Probe Tip and 1/4 in. dia. x 72 in. (1.83 m) Probe Rod
64CR1- 1005 316 Stainless Steel Probe Tip and 1/4 in. dia. x 96 in. (2.44 m) Probe Rod
64CR1- 1006 316 Stainless Steel Probe Tip and 1/4 in. dia. x 120 in. (3 m) Probe Rod
Part Number Description Application
3- 170 Rubber Cap For 61BD1
21- 49- 1
Connector and 10 ft (3 m) Cable Assembly
For 63GH2 -- 63GJ2
21- 50 For 63GH1 -- 63GJ1
31- 224 1 1/2 in. diameter Teflon Spacer Separates double probes when the long probe exceeds 30 in. (76.2 cm)
33- 287 1/4--20 UNC Hex Nut Used with 64CR1 probe assemblies
58- 66 Insulation Suspension Wire Used when the required probe length exceeds 10 ft (3 m)
61- 3284 316 SS 5/8? diameter Suspension Wire Probe Tip Used when the required probe length exceeds 10 ft (3 m)
61- 3285 316 SS Adaptor Connects suspension wire to 61 Series probes
61- 3288 316 SS 9/16 in. diameter Probe Tip Required on all probe rods for rated sensitivity
61- 3519 Resistor Package For 13DJ3--3000