Yamato Scientific BH500 Thermo-Elite - Manual (Page 25)

22
Incidental function
Usage of external output
attention :
The program method, the set method, and the communication interface are
described in detail to the appended owner guide only for the controller. Refer to it.
1. Specification of connector
From the back of Thermo Elite Pin number Name of signal
①
DC+12V
②
Time-up output(open collector)
③
DC+12V
④ External warning output (open collector)
⑤
Temperature output (+)
⑥
Temperature output (-)
⑦
Shield (analog signal)
2. Notes concerning liquid used
•
Unit of output voltage : 5mV/ ℃
•
The output is 0mV at 0 ℃ in measurement temperature.
Output
voltage(V)
Measurement temperature( ℃)
3. External warning output
•
Transistor open collector output
Output load
Power supply DC12V
sink current
MAX 100mA
Specificatio
n of out-put
relay MATSUSHITA JAI-F-TM-
DC12V / OMRON G2R-1A-T
DC12V
TROUBLE
sign (Blink
to a main
display the
err-or code)
External
warning
output
4. Time-out output
•
Transistor open collector output
Output load
Power supply DC12V
sink current
MAX 100mA
Specification
of out-put
relay MATSUSHITA JAI-F-TM-
DC12V / OMRON G2R-1A-T
DC12V
Blink to the
FI-NISH
indicator
Time-out
output
Blinking Blinking
ON ON