Yamato Scientific BH500 Thermo-Elite - Manual (Page 22)

19
Method of using DISPLAY key
The display content of the sub display can be changed over by turns when pushed the DISPLAY
key.
Fixed temperature
operation
Set temperature.
Hour
Auto start operation
During operation
Stand by
Remaining time
Hour
Set temperature.
Remaining time (*1)
Hour
Set temperature.
Remaining time (*2)
Hour
Hour
Remaining time
Hour
Set temperature.
Remaining time
Hour
Execution segment
(*3)
Hour
Auto stop operation
During operation
After time is up
Program operation During operation
Stand by
After finished
Operation mode State Sub display
*1: HOLD is displayed.
*2: When the wait function is set to on, is displayed in the waiting status.
*3: The DISPLAY key will enable to show the rest of the repeat count while the repeat operation.