Yamato Scientific BH500 Thermo-Elite - Manual (Page 18)

15
Operation method
Auto stop operation instructions
1. Selection of drive
menu
Select an AUTO STOP
pushing the MENU key.
The MENU key is pushed.
The menu indicator of
an AUTO STOP blinks.
It is displayed in a sub-
display as TEMP and
enters the state that a set
tempe-rature can be input.
2. Input of set
temperature
Make a main display
display an arbitrary set
temperature pushing ▲▼
keys and push the ENTER
key.
Press ▲▼ keys several times.
A main display is made to display the
hoping set temperature.
The ENTER key is pushed.
Sub-display displays TIME
allowing you to enter when
to end the operation.
3. Input of time
Press ▲▼ keys to blink
stop time (or clock time) on
the main display, and
press the ENTER key.
Press ▲▼ keys several times.
A main display is made to display the
hoping set time.
The ENTER key is pushed.
The sub-display displays
PUMP allowing you to
select pump status after
time is up.