Yamato Scientific BH500 Thermo-Elite - Manual (Page 19)

16
Operation method
Auto stop operation instructions
4. Setting pump
operation status
Press ▲▼ keys to
indicate pump status (ON
or OFF) on the main
display after operation
stop. Push the ENTER key
afterwards.
Press ▲▼ keys several times.
A main display displays ON or OFF.
The ENTER key is pushed.
The sub-display displays
WAIT allowing you to set
the wait function.
5. Selection of wait
function
Press ▲▼ keys to
indicate waiting function
(ON or OFF) on the main
display. Then press
ENTER key.
Press ▲▼ keys several times.
A main display displays ON or OFF.
The ENTER key is pushed.
The sub-display displays
WAIT allowing you to set
the wait function.
Count time
The timer of an auto stop
starts to count down at the
following.
When the wait function is
turning on
It starts when set
temperature has reached
target value.
When the waiting function is
OFFor when stop time is set
in clock time.
It starts right after the
auto stop operation is
started.