Yamato Scientific BH500 Thermo-Elite - Manual (Page 20)

17
Operation method
Programmed operation instructions
1. Selection of operation
menu
Select the PROGRAM
pushing the MENU key.
The MENU key is pushed.
The operation menu indicator
of the PROGRAM blinks.
PROG is displayed in a
sub-display allowing you to
input the execution
program number.
2. Input of execution
program number
ress ▲▼ keys to indicate
an desired program
number on the main
display, and press the
ENTER key.
Press ▲▼ keys several times.
A main display displays
the program number.
ATTENTION
If the program does not exist,
― ― ― ― ― ― ― ― ― ― ― ― ― ― ― ― is blinking.
Please create the new program.
The ENTER key is pushed.
Sub-display displays TIME
allowing you to enter when
to end the operation.
3. Input of time
Press ▲▼ keys to blink
start time (or clock time)
on the main display, and
press the ENTER key.
Press ▲▼ keys several times.
A main display displays
the hoping set time.
The ENTER key is pushed.
The standby indicator on
the operation monitor
blinks waiting for
programmed operation to
start. The operation begins
after the set time passes.