Western Digital WD Arkeia RAx300T Installation and Configuration Guide - Manual (Page 21)

WD Arkeia Physical Appliance Installation and Configuration Guide
15
TAR.GZ:
tar zxvf arkeia-x.x.x.tz
cd package
./install
WINDOWS:
unzip and run setup.exe and follow setup steps
4. Adding the Client to the WD Arkeia Physical Appliance
There are two ways to register the backup client to the backup server.
OPTION #1
Use the WD Arkeia Physical Appliance Web Interface. Navigate to:
Configure  Clients
a.
Click on “Add a Client” icon
b. Add the client information
c. Click on the “Advanced" entry for more options
d. Click “Ok” to add the client to the list of client machines
managed by the WD Arkeia Appliance
OPTION #2
Manually edit configuration files on the client machine to declare the
name of the server that will communicate with that client.
a. Start by stopping the WD Arkeia process on the client machine
LINUX & UNIX: /opt/arkeia/bin/arkboot stop
WINDOWS: Stop Arkeia Services
b. Edit the admin.cfg file of the client to include the fully qualified
domain name (FQDN) of the Appliance.
LINUX & UNIX: vi /opt/arkeia/arkeiad/admin.cfg
Add a line with appliance fully qualified
domain name or IP address
WINDOWS: Use Notepad or another editor to edit:
c:\program files\Arkeia Software\Arkeia Network
Backup\arkeiad\admin.cfg
Add a line with appliance fully qualified
domain name or IP address
c. Start Arkeia on the client machine
LINUX & UNIX: /opt/arkeia/bin/arkboot start