Getting started, Physically connecting the device – Western Digital My Cloud Mirror User Manual User Manual
Page 15
GETTING STARTED
10
WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE
USER MANUAL
Getting Started
Physically Connecting the Device
Getting Started Using Online Setup Software
Getting Started Without Online Setup Software
Accessing Content
It’s easy to set up the WD My Cloud Mirror Personal Cloud Storage device -- all you have to
do is unpack your device, connect it, and wait for the Power LED on the front of your device
to turn a solid blue. Then, download and run the quick setup software, available at
.
Note: For information about safely shutting down and disconnecting the device,
Physically Connecting the Device
Follow the steps below to connect the WD My Cloud Mirror Personal Cloud Storage device
to a home or small office network.
Important: To avoid overheating, make sure the device is upright as shown in
the illustration above and nothing is blocking or covering the slots
and openings on the top and bottom of the device. In the event of
overheating, the device will perform a safe shutdown, interrupting
all processes currently being performed. If this occurs, data may
be lost.
Important: We recommend that you use the enclosed Ethernet cable for
optimal performance.
3
2
3
1
4
3