Waldmann PULSE HFMD version VFC IV - without MFT - Manual (Page 7)

7
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“ ENG
Operation Main functions
Switching on
Press the switch I - the light chan-
ges to light level I.
Press the switch II - the light chan-
ges to light level II.
Switching off
Briefly press the key on which
the LED is lit - this will switch off
the light.
Change light level
Briefly press the key on which the
LED is not lit - this will switch the
light to the other light level.
To change the light level
Press the switch (level I) or the
switch (level II) and keep it pressed.
The appertaining LED starts flas-
hing after approx. 2 seconds. The
light changes its intensity.
To change the dimming direction,
briefly (< 1 sec) release the key and
press it again.
Upon reaching the upper or lo-
wer limit, the LED flashes more
slowly, and the intensity changes
direction.
The presently reached dimming
level is stored when you release
the switch.
Fig. 4
Key I
+ LED I
Sensor Key II
+ LED II