Waldmann PULSE HFMD version VFC IV - without MFT - Manual (Page 20)

20
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“ ENG
Function 1.7
Demo mode
Function to demonstrate and to
test the light functions.
The default setting of this function
is “OFF“, i.e., the demo mode
is inactive.
All control times are working in the
seconds range if the demo mode
is switched on.
Note: This mode is left automati-
cally 10 minutes after the last key
was pressed.
The function can be changed on
lights with sensors XXX /P
Explanation of the functions (part 3)
Fig. 4
Key I
+ LED I
Sensor Key II
+ LED II
Note: The functions written
in blue are not available.