Waldmann PULSE HFMD version VFC IV - without MFT - Manual (Page 17)

17
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“ ENG
Activate setting level 4 (function 4.1 - 4.6)
LED II flashes blue
Actuation Display
LED I depends on the set level
Change function Presence range stepwise increase
Briefly press key I
Change the basic settings - Setting level 4
LED I changes to the next colour:
- Level 1 green 10 %
- Level 2 red 20 %
- Level 3 blue 40 %
- Level 4 turquoise 60 %
- Level 5 magenta 80 %
- Level 6 orange 100 %
Change function Presencerange reduce in stages
Briefly press key II LED I changes to the next colour
(see above)
LED II
LED I
LED I
Press both keys
once for 10 seconds and
three times for 5 seconds
Fig. 4
Key I
+ LED I
Sensor Key II
+ LED II
Note: The functions written
in blue are not available.