Waldmann PULSE HFMD version VFC IV - without MFT - Manual (Page 6)

6
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“ ENG
Operating elements
Via the two keys [I and II] on the
sensor, different functions can be
activated depending on which key
is pressed.
- Switch-on and switch-off
- Change the light level
- Change the light level
- Change basic settings
Operation general
Display
Das selected light level is displayed
via LEDs I or II:
- LED I red Level I
- LED II red Level II
The corresponding other LED flas-
hes green if a presence is detected
(only the first 10 minutes after
connection to the mains or in the
Demo mode).
Fig. 4
Key I
+ LED I
Sensor Key II
+ LED II