Vicor Mini MegaPAC AC-DC Switcher - Manual (Page 12)

UG:110 vicorpower.com Applications Engineering: 800 927.9474 Page 12
Mini MegaPAC “Quick Install” Instructions (Cont.)
Interface Connections J10
n Use Molex mating receptacle #39-01-2120 with #39-00-0039 terminals provided.
n J10-1 to 8 are Enable/Disable for slots 1-8.
n J10-9 is Vcc, J10-10 is Signal Ground, J10-11 is AC Power OK
and J10-12 is General Shutdown.
n Attach terminals to 18-24 AWG stranded wire using Molex tool #11-01-0122.
is General Shutdown.
n Attach terminals to 18-24 AWG stranded wire using Molex tool #11-01-0197.
FlexPAC Connections J1
n Use Molex mating receptacle #39-01-2120 with #39-00-0039 terminals provided.
n Attach terminals to 18-24 AWG stranded wire using Molex tool #11-01-0197.
n J1 pins 11, 5, 12 and 6 are for special trim options. Contact factory for use.
n Local Sense only.
NC
NC
NC
E/D-5
E/D-4
E/D-3
E/D-2
E/D-1
J10-8
J10-7
J10-6
J10-5
J10-4
J10-3
J10-2
J10-1
J10 INTERFACE PIN OUT
GEN SHUTDOWN
AC POWER OK
SIGNAL GROUND
Vcc +5V, 0.3A
J10-12
J10-11
J10-10
J10-9
1 2 3 4 5 6
7 8 9 10 11 12
1 +V OUT M1 7 -V OUT M1
2 +V OUT M2 8 -V OUT M2
3 +V OUT M3 9 -V OUT M3
4 +V OUT M4 10 -V OUT M4
5 DO NOT USE
11 DO NOT USE
6 DO NOT USE 12 DO NOT USE
NC
NC
NC
E/D-5
E/D-4
E/D-3
E/D-2
E/D-1
J10-8
J10-7
J10-6
J10-5
J10-4
J10-3
J10-2
J10-1
J10 INTERFACE PIN OUT
GEN SHUTDOWN
AC POWER OK
SIGNAL GROUND
Vcc +5V, 0.3A
J10-12
J10-11
J10-10
J10-9
1 2 3 4 5 6
7 8 9 10 11 12