USG Structo-Crete Structural Concrete Panel - Manual (Page 2)

Manufactured by
United States Gypsum Company
550 West Adams Street
Chicago, IL 60661
SCP26/rev. 4-13
© 2013, United States Gypsum Company
Printed in U.S.A.
Notice
We shall not be liable for
incidental or consequential
damages, directly or indirectly
sustained, nor for any loss
caused by application of these
goods not in accordance with
current printed instruction or
for other than the intended
use. Our liability is expressly
Trademarks
The following trademarks
used herein are owned
by United States Gypsum
Company or a related
company: S tructo -c rete ,
USG, USG in stylized letters.
SuperDrive is a registered
mark of Grabber Construction
Products.
Product Information
See usg.com for the most
up-to-date product information.
limited to replacement of
defective goods. Any claim
shall be deemed waived unless
made in writing to us within
thirty (30) days from date it
was or reasonably should have
been discovered.
Safety First!
Follow good safety/industrial
hygiene practices during
installation. Wear appropriate
personal protective equipment.
Read MSDS and literature
before specification and
installation.
888 STRUCTO (787.8286)
structo-crete.com
usgdesignstudio.com
Fastener System for Cold-Formed Steel To better secure and facilitate installation of S
tructo -c rete structural concrete panels to cold-formed steel
framing, USG recommends a low-speed, high-torque drive system such as the Grabber SuperDrive ™ 75 Series
with Extension system. The use of ordinary high-speed, low-torque drill guns are more likely to strip screw
heads, thereby making it difficult to properly secure the panel to the steel framing. This may result in gapping
between the panel and the supporting framing. Gaps formed by improper tightening of the fastener may result
in the future settling of the panel onto the
framing under normal floor loading,
causing screw heads to rise up from the
panel and protrude through underlayment
and/or floor coverings.
Contact For more information, contact your S
tructo -c rete sales representative. To find a representative in your area, visit
structo-crete.com and click on “Contact Us” under “Quick Links.”