USG SHEETROCK Gypsum Liner Panels User Manual

Page 2

SAFETY FIRST!
Follow good safety practices.
Read material safety data
sheets and related literature on
products before specification
and/or installation.

Accessory

Gypsum Panel Joints

Finish all face layer joints and internal angles with a S

HEETROCK

Brand Interior Finishing

Application

System installed according to manufacturer’s directions. See USG product folder J1424 for detailed
recommendations.

Corner Bead

Reinforce all vertical and horizontal exterior corners with S

HEETROCK

Brand Paper Faced Bead and

Trim. See USG product folder J1424 for detailed recommendations.

Metal Trim

Where shaft wall terminates against masonry or other dissimilar material, apply S

HEETROCK

Brand Paper

Faced Bead and Trim over face layer edge.

Screws

– S

HEETROCK

Brand Gypsum Panels

Power-drive at least 3/8

Љ from edges or ends of gypsum panels to provide uniform dimple 1/32Љ deep. Follow

spacing requirements of appropriate fire-resistance design.

– I

MPERIAL

Brand Gypsum Base

Power drive flush with surface without tearing face paper. Follow spacing requirements of appropriate fire-resis-
tance design.

Trademarks
The following trademarks used
herein are owned by United
States Gypsum or a related
company: F

IRECODE

, I

MPERIAL

HEETROCK

, U

LTRACODE

Note
Products described here may
not be available in all geo-
graphic markets. Consult your
U.S. Gypsum Company sales
office or representative for infor-
mation.

Notice
We shall not be liable for inci-
dental or consequential dam-
ages, directly or indirectly sus-
tained, nor for any loss caused
by application of these goods
not in accordance with current
printed instructions or for other
than their intended use. Our lia-
bility is expressly limited to
replacement of defective goods.
Any claim shall be deemed
waived unless made in writing
to us within thirty (30) days from
the date it was or reasonably
should have been discovered.

Manufactured by
United States Gypsum Company
125 South Franklin Street
Chicago, IL 60606

800 USG.4YOU (874-4968)
www.usg.com

Page 2 of 2