USG Structo-Crete Structural Concrete Panel - Manual (Page 6)

Manufactured by
United States Gypsum Company
550 West Adams Street
Chicago, IL 60661
SCP14-F/11-11
© 2011, United States Gypsum Company
Printed in U.S.A.
caused by application of these
goods not in accordance with
current printed instruction or
for other than the intended
use. Our liability is expressly
limited to replacement of
defective goods. Any claim
shall be deemed waived unless
Company or a related
company: S tructo -c rete ,
USG, USG in stylized letters.
Notice
We shall not be liable for
incidental or consequential
damages, directly or indirectly
sustained, nor for any loss
Product Information
See structo-crete.com for
the most up-to-date product
information.
Trademarks
The following trademarks
used herein are owned
by United States Gypsum
made in writing to us within
thirty (30) days from date it
was or reasonably should have
been discovered.
Safety First!
Follow good safety/industrial
hygiene practices during
installation. Wear appropriate
personal protective equipment.
Read MSDS and literature
before specification and
installation.
888 STRUCTO (787.8286)
structo-crete.com
usgdesignstudio.com
APPLY BLOCKING
BEFORE PANEL
APPLICATION
LESS
THAN 24"
SPOT WELD
SPOT WELD
FIELD WELDING TO
COLD-FORMED FRAMING
MEMBERS MUST BE BY
CERTIFIED WELDER
AND APPROVED BY
THE STRUCTURAL
ENGINEER OF RECORD
NOTE:
FLOOR SYSTEM
PANEL BLOCKING
· BLOCK EDGES THAT ARE LESS THAN 24" WIDE.
· BLOCK EDGES THAT ARE LESS THAN 24" WIDE
Structo-Crete
™
Structural Concrete Panel
Tip Sheet
Floor Assembly
Panel Blocking A