USG DRYSTONE Casting Media Mixing Procedures - Manual (Page 2)

.
NOTE: Removing cast material in a cold area may result in
thermal shock cracking. If this occurs begin demolding after
material has started cooling.
HEALTH AND SAFETY INFORMATION
WARNING:
When mixed with water, this material hardens
and then slowly becomes hot. DO NOT attempt to make a
cast enclosing any part of the body using this material.
Failure to follow these instructions can cause severe burns
that may require surgical removal of affected tissue. Avoid
dust. Dust may cause irritation to the eyes, skin, nose, throat,
or upper respiratory system. Wear eye and respiratory
protection to avoid irritation. Product safety information:
(800) 507-8899.
Notice: We shall not be liable for incidental or
consequential damages, directly or indirectly sustained, nor
for any loss caused by application of these goods not in
accordance with current printed instructions or for other than
the intended use. Our liability is expressly limited to
replacement of defective goods. Any claim shall be deemed
waived unless made in writing to us within thirty (30) days
from date it was or reasonably should have been discovered.
Trademarks: D RY S TONE is a trademark of United States
Gypsum Company. J IFFY is a trademark of the Jiffy Mixer
Co. Inc.
United States Gypsum Company
Industrial Gypsum Division
125 South Franklin Street
Chicago, IL 60606-4678
Technical Assistance: (800) 487-4431
©1996, United States Gypsum Company
IG358/8-96 Printed and Produced in U.S.A.