TruXedo Deuce Covers manufactured before 12/17/12 - Manual (Page 6)

___ 6 ___
• to prevent accidental release of tailgate header, ensure header is securely latched to side rails on both sides of pickup bed before
driving vehicle.
•
to prevent wind lift, secure veLcRo ® brand fasteners along entire length of both side rails before driving vehicle.
!
19 20
cover secured open
safety
straps
Secure cover open by hooking safety
straps to front loops.
pull cover over rails
toggle
press
edges
Secure hook fasteners and Velcro ® loop
fasteners on one side rail, by pressing along
full length of rail. Pull cover tight across
pickup bed, and secure opposite side rail.
To prevent wind lift, secure hook fastener and
Velcro ® loop fastener strips along entire length of
both side rails before driving vehicle.
to close: After closing
front hinged portion
of cover, try to lift up
on front of cover to
make sure latch is
secured and cover
will not open.
oPen and cLose coveR (continued)
21
to engage: Roll cover opened from tailgate.
Slide plastic knob against latch lever and
tighten knob.
tailgate Header will not latcH:
-Check side rails to make sure they are level. See Step
2.
-Check position of side rails on pickup box, they may be
positioned too low. See Step 1.
- Refer to step 15 on proper closing procedure.
Fabric cover is too tigHt or too loose:
See Step 16 to adjust cover tension.
* veLcRo® is a registered trademark of the velcro companies.
tRouBLe shootInG
latch lever
plastic knob
17
to open: Move latch with thumb to
release front hinged portion of cover.
Lift up and flip cover back to open.
move latch to
open
18
added secuRIty devIce