TruXedo Dodge RamBox - Manual

Weld nut shown inside the top
track of cargo rail.
Item Part # Description
1. 1704353 SCREW 3/8-16 x 5/8
2. 1704373 Weld Nut 3/8
3. 1704374 Washer, Lock 3/8”
4. 1704246 Clamp Bracket Rambox
P/N 1117516 Rev C
assembly of dodge rambox Tm cover To Truck
NoTIce
Replacement Parts List
4
1
2
STEP 1.Remove the end cap from the driver side cargo rail.
Remove end caps
STEP 2. Assemble hardware as shown.
STEP 3.
Apply corner seal to
front inside corner of
box.
Top track of cargo rail
Cargo Rail
STEP 5. Starting from the front bulkhead of the Rambox TM place brackets at the dimensions shown and then tighten.
Bracket One Bracket three
Bracket Two
32-1/2” (5 1/2’ Box)
37” (6 1/2’ Box)
For correct bracket placement start measuring at the inside face of trucks bulkhead.
STEP 6. Fasten the Lo Pro QT rail to the brackets with the hardware shown.
STEP 4.
Item Part # Description
1. 1703852 SCREW 1/4-20 x 5/8
2. 1700427 Washer 1/4
3. 1701543 Nut 1/4-20
Replacement Parts List
Lo Pro QT Rail 1
3 2
STEP 7.
Follow steps 1 through 6 to mount the driver side
rail. After the side rails are attached insert the
plastic cargo rail end caps. Refer to the owners
manual for instructions on how to attach the cover
assembly and for other operations of the tonneau
cover.
Slide three assembled brackets into each track of the driver and passennger side
cargo rail.
Corner Seal
3
7-1/4”
Bracket Three
57-3/4” (5 1/2’ Box)
66-3/4” (6 1/2’ Box)
Bracket Two
Passenger
Side Shown