Titus HEPAlert IOM for TLF Diffusers - Manual (Page 4)

HEPA
LERT
Kit Installation Manual
IOM-HEPA-TLF -00
725343-01
09-30-04
4 of 7
16. Secure a Class 2 – 120 Vac to 24 Vac transformer
(rated for 40 VA. Transformer supplied by others) to
back pan using self-tapping screws (see Figure 10).
17. Connect spade-tongue terminal of 14-inch red wire
assembly to terminal barrier strip across from
previously connected red wire (see Figure 11).
18. Connect spade-tongue terminal of 14-inch white wire
assembly to terminal barrier strip across from
previously connected white wire (see Figure 11).
19. Feed quick-connect terminals of red and white wire
assemblies through grommet in side of base bracket.
Connect to transformer (see Figure 11).
NOTE: A single transformer may be used to
power multiple HEPAlert Kits. Each kit includes
the 60-inch red and white wire assemblies to
interconnect terminal barrier strips on adjacent
diffusers.
20. Place and align top cover to base bracket and secure
using self-tapping screws to secure (see Figure 12).
21. Connect AC supply power wires to transformer (see
Figure 13).
22. Install clean HEPA filter with wing nuts. Restore the
face screen to diffuser.
Note: Use a Class 2 – 120 Vac to 24 Vac transformer (rated
for 40 VA).
Figure 10. Transformer Placement
Figure 11. HEPA LERT Kit and Transformer Wiring
Figure 12. Securing Top Cover
Figure 13. Power Cord Connection