beautypg.com

Installation, Regular faceplate installation – Regency Horizon HZI540PB Large Gas Insert User Manual

Page 37

background image

L540PB-2 / HZI540PB-2 Direct Vent Gas Insert

37

INSTALLATION

REGULAR FACEPLATE INSTALLATION

Note: Faceplate may be installed after the unit is in it's fi nal position.

1. Install bracket on left side of unit with 2 screws in locations
shown below.

3. Use supplied wire clip to contain excess wire to the back of the bracket.

5. Cut cable tie to release bundled power cord.

6. Bring power cord to the back of the right bracket (without slack) - secu

with supplied wire clip.

Wire clip

Power Cord

Power Cord wire clip

Wire clip

Left Bracket

Fan Speed Wire Connection

Valve Wire Connection

2. Install bracket with fan speed controller on the right side of the unit.
Connect the 2 wires from the fan speed controller (2 female connectors to

the wires located on the side of the unit (2 male connectors).

4. Connect the 2 female wires to the valve at TH/TP-TH terminals.

Wire clip