Sulky VISION 1 SPB < 06/2009 User Manual

Page 41

Mise en route rapide

Quick power up

Schnelle Inbetriebnahme

Select the

menu

Make sure that all the parameters are correct: speed coefficient and working width.

Select the seed to be used and record the TGW.

Perform a calibration test.

Programme the marking-out operation

Select the menu

Select

Use

to set each meter to zero

Select to record the data.

Select the

menu

Make sure that the correct seed has been selected

Enter the required kg/ha dose and confirm using

Press again to display the dose in g/m2

Programme your marking-out pass for the start of the plot

Use

to stop the automatic marking count

Press again to return to the count

Select

to adjust the flow rate.

Select to revert to the initial dose.