Stack-On GORTA-1250 - Manual (Page 3)

3. Wall Mounting
Option 1
Mount the cabinet directly to the wall studs through the mounting holes in the top and
bottom using 4 lag bolts and washers. (4a)
Option 2:
Mount the cabinet using the hanging bracket supplied. Keeping the bracket level
mount the bracket to the wall studs using 2 lag bolts and washers. Hang the cabinet on
the upper flange of the top back panel. Mount the bottom of the cabinet to the wall
studs with 2 lag bolts and washers. (4b)
After mounting the doors to the cabinet you can adjust the squareness of the cabinet so
the doors operate correctly. Loosen the bottom 2 lag bolts and shift the cabinet bottom
left or right to square the cabinet. Re-tighten the lag bolts.
3a
3b
40147-0910
3 12
OPTION 1 OPTION 2