Salsbury Industries 4075 Mail Slots Deluxe Style - Manual

Mail Slots – 4075
Deluxe Style Installation Instructions
Thank you for selecting Salsbury’s deluxe mail slot model 4075. The two (2) piece deluxe mail slots are made of brass and can be installed in doors
and walls from 1-1/4” – 1-7/8” deep. Heavy duty tamper proof brass bolts secure the front and back frames to each other from the rear.
Installation
1. Position the front frame on flat surface in center of door at
desired height and mark four screw holes and four circle
centers for the rough opening.
2. Using 1/2” drill bit, drill four circle centers from front of door
to a depth that allows drill bit tip to penetrate back of door,
then finish hole by drilling from back of door. Mark
horizontal and vertical dotted cut-out lines of rough opening
from hole to hole.
3. Use a saw to cut out opening along dotted cut out lines.
4. Make sure front frame is level and centered over opening
on outside of door. Ensure that flap swings inward and
closes freely. Mark screw holes and drill 4 - 5/16” through
holes.
5. Secure back frame using the heavy duty tamper proof
brass bolts (provided).
Cleaning
Polish with a soft cloth or sponge.
DO NOT use abrasive materials on cast brass surfaces.
SALSBURY INDUSTRIES
1010 East 62 nd Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.mailboxes.com engineering @ mailboxes.com
Model 4075 – Deluxe Mail Slot
Unit Overall Dimensions
13-1/4”W x 3-1/2”H
Rough Opening Dimensions
11”W x 3”H
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2010 Salsbury Industries. All rights reserved. (Rev. 03, 4/28/2010)