Salsbury Industries 4975 Series Courier Boxes - Manual

Courier Boxes – 4975 Series
Installation Instructions
Thank you for selecting the 4975 series courier box. The heavy-duty units are constructed of 14 gauge steel and feature a durable powder coat
finish. They provide the utmost in security and can withstand severe weather conditions. We are confident that the quality and construction of the
collection boxes will prove to be a good investment. The units are fully assembled and ready to be installed.
Model 4975 Courier Box
Installation
Due to the various types of surfaces on which the courier boxes might be ultimately mounted, there is no installation hardware included with the unit.
Select and procure the bolts and anchors according to the type of surface, be it wood, cement, or another material. In certain applications, it may not
be necessary or desirable to fasten the unit down. However, before this decision is made, carefully consider the security of the courier box.
There is one 9/16” diameter hole in each of the four feet in the 4975 courier box to fasten the unit down to the surface on which it is placed. Lag
screws with or without expansion anchors or bent anchor bolts (buried in concrete) with nuts may be used to fasten the units down, as an example.
Suggested size is 3/8” diameter bolts.
The 4975 courier box includes an integral three-point locking system with two keys provided.
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.mailboxes.com engineering @ mailboxes.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2006 Salsbury Industries. All rights reserved. (Rev. 01, 8/19/2009)