Salsbury Industries S-62000 Series See Through Lockers Double Tier - Manual (Page 2)

See Through Lockers – S-62000 Series
Double Tier Installation Instructions
Phone: 1-800-562-5377 Int’l Phone: 323-846-6700
Fax: 1-800-562-5399 Int’l Fax: 323-846-6800
www.lockers.com [email protected]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2014 Salsbury Industries. All rights reserved. Page 2 of 5 3/27/14
SALSBURY INDUSTRIES
1010 East 62 nd Street, Los Angeles, CA 90001-1598
Three Wide Locker Assembly
Step 1: Attach the top shelf, bottom shelf, and two single coat hooks to the back
panel.
Step 2: Turn the back panel on its back with the shelves pointing upward. Attach the
first side panel, the left rear leg, and one compartment divider to the assembly from
Step 1. Attach an additional two single coat hooks to the first side panel and a double
coat hook to the bottom of the top shelf and a second double coat hook to the bottom
of the compartment divider.
Step 3: Attach the second top shelf, the second bottom shelf, and an additional two
single coat hooks to the second back panel as in step 1.
Step 4: Simultaneously attach the assembly of Step 3 (second Step 1 assembly), the
second side panel, and one additional compartment divider to the assembly of Step 2.
Attach two coat hooks to each side of the second side panel, and attach two double
coat hooks to the assembly of step 3.
Step 5: Attach the third top shelf, the third bottom shelf, and an additional two coat
hooks to the third back panel as in steps 1 and 3.
Step 6 Simultaneously attach the assembly of Step 5 (third Step 1 assembly), the third
side panel, and one additional compartment divider to the assembly of Step 4. Attach
two coat hooks to each side of the third side panel, and attach two double coat hooks
to the assembly of step 5.