S&S Cycle Cycle Guardian Diagnostic System - Manual (Page 6)

File Menu
Selecting File from the menu bar brings up the following menu
selections:
New - Creates a new Guardian configuration file.
Open - Opens an existing configuration file.
Save - Saves the current configuration file.
Save As - Lets you save the current configuration file under a
different file name.
Print - Prints the current configuration information.
E-Mail to S&S® - Emails the current configuration file to S&S®
Cycle Technical Support for evaluation.
Exit - Exits the Guardian program.
Create New File
To create a new file, select "New" from the menu bar or click on the
toolbar button to bring up the "New Configuration File" box.
•
•
•
•
•
•
•
Enter a new file name in the "File Name" box, and click on "Save".
This will create a new configuration file. You can change the
directory that the file is saved in by clicking on the "Save In" box,
and selecting the desired directory.
Open Existing File
To open an existing file, click on the "Open" file menu item or click
on the tool bar button.
You can select the desired directory by clicking in the "Look In"
directory box. Select the file name you want to open, and it will
appear in the "File Name" box. Click "Open" or press "Enter" to
open the file.