Robustel M1000 XP User Guide - Manual (Page 26)

Robustel GoRugged M1000 XP User Guide
RT_UG_M1000 XP_v.1.0.0
19.11.2013 25 / 57
Confidential
Interval Timeout
This value allows gateway to packet the received data as a TCP/UDP
packet and sends it out even the size of them hasn’t reached the
limit of Packet Length.
3
Packet Length
The limits size of the received data that gateway will packet as a
TCP/UDP packet.
1024
Delimiter
The delimiter indicate gateway to packet the received data as a
TCP/UDP packet and sends it out even the size of them hasn’t
reached the limit of Packet Length.
00
Delimiter Process Select from “Do Nothing” and “Strip Delimiter”. Do Nothing
3.7 GPRS
The major difference between M1000 XP serial to GSM/GPRS/UMTS gateway and traditional modem such as
M1000/M1000 Lite is that M1000 XP built-in PPP and TCP/IP protocols, supports automatic GSM/GPRS/UMTS
connection, no AT commands required, which can enable transparent TCP/UDP transmission.
Traditional GPRS gateway can only dialup to internet via external PPP enabled host device such as PC, PLC with
built-in PPP protocol.
This tab allows user to set GPRS/UMTS and related items for automatic GPRS/UMTS connection: