Robustel R3000 NU - Manual (Page 76)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 75 / 110
Confidential
PPTP Server @ PPTP
Item Description Default
Enable PPTP Server Tick to enable PPTP server. Disable
Username Set the username which will assign to PPTP client. Null
Password Set the password which will assign to PPTP client. Null
Authentication
Select from “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
PPTP client need to select the same authentication method based on this
server’s authentication method.
CHAP
Local IP Set the IP address of PPTP server. 10.0.0.1
IP Pool Start Set the IP pool start IP address which will assign to the PPTP clients. 10.0.0.2
IP Pool End Set the IP pool end IP address which will assign to the PPTP clients. 10.0.0.100
Enable MPPE
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a protocol for
encrypting data across PPP and VPN links.
Disable
Show PPTP Server
Advanced
Tick to show the PPTP server advanced setting. Disable
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default. Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default. Enable
Asyncmap Value
One of the PPTP initialization strings. In general, you don’t need to modify
this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of packet,
which is possible to receive in a given environment.
1500