Robustel R3000 NU - Manual (Page 33)

Robustel GoRugged R3000 NU User Guide
RT_UG_R3000 NU_v.1.0.0 24.03.2014 32 / 110
Confidential
Note: when R3000 NU enable WiFi feature and works as Client mode
Basic @ WiFi
Item Description Default
Enable WiFi Click to enable WiFi feature. Null
Mode
This item will show “AP” and “Client”, cannot be configured.
AP: In a wireless local area network (WLAN), an access point is a station
that transmits and receives data. When R3000 NU is wanted to work as
“AP” mode, please go to tab “Configuration” -> “Link Management” ->
“Primary Interface” to select “Eth0” as WAN link.
Client: When R3000 NU works as Client mode, it can be used as an
Ethernet-to-wireless (or LAN-to-WLAN) network adaptor. For example,
a notebook computer equipped with an Ethernet adaptor but no
wireless card can be connected to the router with an Ethernet cable to
provide wireless connectivity to another AP. When R3000 NU is wanted
to work as “Client” mode, please go to tab “Configuration” -> “Link
Management” -> “Primary Interface” to select “WiFi” as WAN link.
Null
Channel
Select the frequency channel, which includes “Auto”, “1”, “2”…… “13”.
Auto: R3000 NU will scan all frequencies until it finds one with an
available access point or wireless network it can join.
1~13: R3000 NU will be fixed to work with this channel.
Auto
SSID
SSID (service set identifier) is the network name of the WLAN. The SSID
of a client and the SSID of the AP must be identical for the client and AP
to be able to communicate with each other.
When R3000 NU works as Client mode, enter SSID of the access point
which R3000 NU want to connect.
Input from 1 to 31 characters.
Router_AP