RKI Instruments GX-2009 - Manual (Page 42)

42 • Setting Commands
in “Load Local File” on page 37. A parameter configuration file
containing RKI standard settings can be found on the GX-2009
Product CD and can be used after a default reset if a parameter
configuration file was not saved. Once the RKI standard setting
file is loaded, the settings can be changed to match the original
configuration of the GX-2009.
The parameter configuration files that are created have a .seq
file extension. These files can only be used by the User Setup
Program. When you use Store Local File, you can save the
created files to any accessible location on your hard drive. Make
sure to define a convenient location on your hard drive for these
files if you use this feature so that you can conveniently find
them when you want to upload a file to an instrument. When you
select names for these files, you may want to structure the file
names so you can identify from which instrument the file was
saved or so that you can identify a particular parameter
configuration. Structure the file names so that you can easily
identify the files as containing the information that is important to
you.
Follow these steps to create a parameter configuration file
based on a connected instrument:
1. Launch the GX-2009 User Setup Program as described in
“Launching the Program” on page 14.
2. Connect the GX-2009 to the User Setup Program as
described in “Connecting a GX-2009 to the User Setup
Program” on page 15.