RKI Instruments GX-2009 - Manual (Page 37)

Setting Commands • 37
that you want to turn off the instrument.
3. Click Yes. The program will take several seconds to turn off
the instrument. The Connect Light in the Status area will turn
gray indicating no connection to an instrument and the
parameter fields in the GX-2009 Status area will become
empty except for the PC Date/Time and the Interval Trend
Time fields.
Load Local File
Use Load Local File to load a parameter configuration file to
the program so that you can upload it to an instrument. The
parameter configuration files have a .seq extension and are only
readable by the GX-2009 User Setup Program. The parameter
configuration files are user created by using the Store Local
File button to save a file based on a connected instrument’s
parameter settings. See “Store Local File” on page 41 for a
description of how to create and save a parameter configuration
file.
NOTE: If a GX-2009’s default settings have been reset, a saved
parameter configuration file can be loaded to restore the
original settings. See “Store Local File” on page 41 for
instructions. If a file was not saved prior to resetting the
defaults, a file containing RKI standard settings can be
found on the GX-2009 Product CD.
Figure 31: Setting Commands