RKI Instruments GX-2009 - Manual (Page 12)

12 • IrDA Downloading Cable
Hardware Wizard to install the cable drivers.
Windows ® Wireless Link Operation Note
When using an IrDA adapter cable and the GX-2009 User Setup
Program on a Windows
®
computer, it is necessary to make a
special setting in the Wireless Link Configuration window for
proper communication between the GX-2009 and the GX-2009
User Setup Program. This must be done before attempting to
use the program. Follow these steps to make this setting:
1. Click Start on the Windows
®
Icon Tray.
2. If Control Panel is available to select in the Start menu,
select it. The Control Panel will appear.
If Control Panel is not selectable in the Start menu but
Settings is, select Settings, then select Control Panel. The
Control Panel will appear.
3. Double click on Wireless Link. The Wireless Link
Configuration window will appear.
4. Click on the Image Transfer tab.
5. Deselect the selection box for “Use Wireless Link to transfer
images from a digital camera to your computer.”