RKI Instruments GX-2009 - Manual (Page 41)

Setting Commands • 41
8. When the uploading is complete, the program will indicate
that it is done.
9. Click OK. The program will return to the Main Window. The
instrument’s parameters have now been updated based on
the loaded parameter configuration file.
Store Local File
Use Store Local File to save a parameter configuration file
based on an instrument’s parameter settings. The file can then
be uploaded at a later time to another instrument to make its
parameter settings match the original instrument’s parameter
settings or to restore the parameter settings of the original
instrument if they have been changed. The instrument
identification parameters, serial number, user ID, and station ID,
are not saved in the parameter configuration files and they will
not be changed when a file is uploaded to an instrument.
A parameter configuration file that contains your specific
configuration information should be saved in case consultation
with the factory determines that the instrument’s default settings
need to be reset.
NOTE: Consult RKI Instruments, Inc. before resetting the
GX-2009’s default settings.
Once the defaults have been reset, the saved parameter
configuration file can be loaded into the GX-2009 as described
Figure 35: Upload Complete Window