RKI Instruments RM-5000 Series Indicator/Alarm Unit - Manual (Page 7)

2 Important Notices on Safety 2-3. Precautions
- 7 - RM-5000
2-3. Precautions
CAUTION
Do not use a transceiver near the indicator/alarm unit.
Radio wave from a transceiver, etc. near the indicator/alarm unit or its cables may disturb indication
reading. If a transceiver or other radio wave transmitting device is used, it must be used in a place
where it disturbs nothing.
To restart the indicator/alarm unit, wait for five seconds or more before doing it.
Restarting the indicator/alarm unit in less than five seconds may cause errors.
Do not use the external output of the indicator/alarm unit to control other units.
This is not a control unit. It is not allowed to use the external output of the indicator/alarm unit to
control other units.
Do not disassemble/modify the indicator/alarm unit, or change the settings if not necessary.
Disassembling/modifying the indicator/alarm unit will invalidate the warranty of the performance.
Changing the settings without understanding the specifications may cause alarm malfunctions.
Please use the indicator/alarm unit properly in accordance with the operating manual.
Never fail to perform a regular maintenance.
Since this is a safety unit, a regular maintenance on it and the detector head must be performed to
ensure safety.