Retsch SM 100 - Manual (Page 35)

Cleaning and service
35
Fig. 22: Mounting the sealing ring with felt gasket
Pos : 8. 5 / 00005 Übersc hrift en/1. 1 Ü berschrif ten/ 1. 1 Ü bers chrift en BDA/ 11 R einigung @ 0\ mod_1226909670239_9. doc @ 3607 @ @ 1
6.3 Cleaning
Pos : 8. 6 / 00004 War nhi nweis e/ V0027 VORSICHT Schnit t verl etz ung en Rotor wechsel und Rei nigung @ 2\ mod_1259065354428_9.doc @ 17601 @ @ 1
CAUTION
Injuries in the form of cuts
Sharp cutting edges on the rotors and cutting bars
– The sharp cutting edges on the rotors and cutting bars can injure hands.
• Wear protective gloves when replacing the cutting rotors and
cleaning the grinding chamber.
• Use the rotor extraction tool when handling the cutting rotors.
Pos : 8. 7 / 00004 War nhi nweis e/ V0055 VORSICHT Schnit t verl etz ung en G ef ähr dung durc h Scheren am Bodensieb (SM 300, SM 200, SM 100) @ 3\ mod_1282743609296_9.doc @ 22867 @ @ 1
CAUTION
3.V0055
Cuts
Danger due to shears on the bottom sieve
– There is risk of cuts from the shears when inserting and removing the
bottom sieve.
•
Do not put hands in the outlet hopper.
•
Only change or remove the sieve when the rotor has been removed.
Pos : 8. 8 / 00010 Bedienungsanlei tungen Kapit elsamml ung en/SM 100/ 0040 SM100 Wart ung, R einigung und Versc hleiß /4010 SM 100 M odul R einigung @ 3\ mod_1289287670269_9. doc @ 24010 @ @ 1
WARNING
1.W0004
Risk of injury
When device is not correctly assembled after cleaning
– There is a risk of injury to the operator.
•
The device may only be cleaned by skilled personnel who have been
sufficiently instructed in operating the device.
The following components on this device can be removed or moved for cleaning
purposes:
SD
SD
DR
FD