Retsch Cryomill - Manual (Page 44)

Operating the machine
44
Fig. 40: Starting the grinding process
• Press the START button to start the grinding process.
– The Start LED (green) lights up. At the same time the solenoid valve opens
and liquid nitrogen can flow into the cooling system.
Pos : 6. 49 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Mahl vorgang unter brec hen und wei terf ühren @ 1 \ mod_1241510629134_9. doc @ 8833 @ @ 1
5.14 Interrupting and continuing the grinding process
Pos : 6. 50 /00010 Bedi enungsanleit ung en Kapitels ammlungen/Cr yoMill II /0007 Bedi enung/0026 Cr yoMill II Modul Pausenf unkti on @ 5\ mod_1345098786153_9.doc @ 34130 @ @ 1
5.14.1 Pausing grinding
Fig. 41: Pausing grinding
• Press the STOP button (B13) once.
– Grinding is interrupted and the LED above the START button flashes.
5.14.2 Cancelling grinding
Fig. 42:
• Press the STOP button (B13) twice.
– The grinding is ended and the two LEDs above the START and STOP
buttons are off.
Pos : 6. 51 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Mahl vorgang s toppen @ 0\ mod_1226909892231_9.doc @ 3643 @ @ 1
5.15 Stopping the grinding process
Pos : 6. 52 /00010 Bedi enungsanleit ung en Kapitels ammlungen/Cr yoMill II /0007 Bedi enung/0021 Cr yoMill II Modul Stoppen des Mahl vorgang es @ 5\ mod_1343829257317_9. doc @ 33367 @ @ 1
B13
B13 B13