Retsch Cryomill - Manual (Page 36)

Operating the machine
36
Fig. 27: Inserting the grinding jar adapter
Pos : 6. 25 /00005 Ü berschrif ten/ 1. 1. 1 Ü bersc hrift en/ 111 Adapter f ür 4/2 x 2 ml Eppendorf Reaktionsgef äß e eins et zen @ 1 \ mod_1243499921893_9. doc @ 10328 @ @ 1
5.5.4 Insert the adapter for 6 / 4 / 2 x 2-ml Eppendorf reaction vial
Pos : 6. 26 /00010 Bedi enungsanleit ung en Kapitels ammlungen/Cr yoMill/0101 Warnhinw eis e/Cr yoMill HIN WEIS Zer brec hen von Eppendor f R eaktionsgef äß en @ 1 \mod_1243499975784_9. doc @ 10336 @ @ 1
NOTICE
Breaking of Eppendorf reaction vials
Changing material properties
–
The Eppendorf reaction vials that are available as accessories change
their material properties during the cryogen grinding.
• Do not reuse reaction vials after the cryogen grinding.
• Do not insert reaction vials in centrifuges after the cryogen grinding
• Grinding may take place with a maximum 25Hz.
Pos : 6. 27 /00010 Bedi enungsanleit ung en Kapitels ammlungen/Cr yoMill II /0007 Bedi enung/0008 Cr yoMill II Modul Eppendorf G ef äße ei ns etz en @ 5\ mod_1343829240370_9. doc @ 33224 @ @ 1
You can operate the CryoMill with 2, 4 or 6 Eppendorf reaction vials (2ml).
NOTICE
Grinding with Eppendorf reaction vials may only take place with a maximum 25Hz.
(frequency 1/s)
• Insert the 2ml Eppendorf reaction vials into the adapter for reaction vials as
shown in the diagram below.
Fig. 28: Inserting 2ml Eppendorf reaction vials