RaySafe Solo - Manual (Page 6)

the RAySAfe Solo
the RaySafe Solo consists of a base unit and a detector.
Communication between detector and base unit is purely digital, thereby minimizing sensitivity to mechanical
or electrical stress.
the RAySAfe Solo deteCtoR optIonS
• the R/F detector has two sensors: R/F high is designed for conventional, high dose rate measurements.
R/F low is designed for low dose rate measurements. the RaySafe Solo R/f base unit can be equipped with
mA/mAs capabilities.
• the MAM detector is used for both low and high dose rates generated in mammography applications.
• the MAM dose detector is a Solo MAM detector, but measures only dose, dose rate and time.
• the Dose detector is an R/f detector, but measures only dose, dose rate, time and pulses.
• the RAD detector is designed for conventional, high dose rate measurements normally generated without a
phantom between the detector and the X-ray source.
• the CT detector is an ionization chamber, designed to measure Ct dose for applications such as dose
length product (dlp) and Computed tomography dose Index (CtdI).
• the DENT detector is designed for measurements on intraoral dental X-ray machines, opG and Cone beam.
• the light detector is designed to measure luminance on lCd and CRt monitors, as well as light boxes, and
illuminance for diagnostic X-ray applications.
• there is also a RaySafe Solo mAs model for measuring mA/mAs, time and pulses.
6
RaySafe Solo User Manual – the RaySafe Solo