RaySafe X2 Manual - Manual (Page 13)

CHARGE THE BATTERY
To charge the base unit, connect it to a wall socket with the included power supply. The charging time is
approximately 4 hours.
The battery lasts for about one day of extensive usage, which means that it is recommendable to start your
working day with a fully charged unit.
The X2 system automatically enters power saving mode when idle for some minutes. If the system does not
wake up by radiation or the buttons on the front, press the power button.
Tip!
The base unit will maintain the energy level when connected to a computer.
RaySafe X2 User Manual
13