Precision Turbo and Engine BigStuff3 GEN3 Powertrain Controller Transmission Control Users Manual - Manual (Page 20)

Bigstuff3 GEN3 Transmission Control Manual
right side of the screen (Signals in the Dash). All Signals shown under “Signals in the Dash” will now
appear at the bottom of the TCC screen when that screen is used to calibrate the TCC Table.
In the TCC Table below Gear, MPH , TPS and Trans Mode Code where selected and added to “Signals
in the Dash”
TCC Table
Dash
Signals
selected for
the TCC
Dash
Available
Signals
In the screen print below notice that the same “Signals” appear in the Dash at the bottom of the TCC
screen.
TCC Dash
20