Precision Turbo and Engine BigStuff3 GEN3 Powertrain Controller Transmission Control Users Manual - Manual (Page 13)

Bigstuff3 GEN3 Transmission Control Manual
When the key board
Shift key is
depressed, “Edit
Mode” is displayed
in the gear position
box.
Cursor displaying
MPH value for this
shift point value.
The blue
background
designates that the
table is in “Edit
Mode”
The MPH associated with any shift point box will be displayed as the cursor moves from point to point
along the red or green lines.
Lastly, there are safety parameters in the software that do not allow an up-shift or down-shift point
from one table (gear) to overlap a shift point in another table (gear).
Torque Converter Clutch (TCC) Table
13