Precision Turbo and Engine BigStuff3 GEN3 1st Gear Spark Retard with Traction Control System (SR2) - Manual (Page 7)

Rev 1.0 7
From the Torque Management drop down, select “Torque Parameters”. The screen below will open. Select
“Timing Retard Mode”.
Misfire Configuration
This function is not active with the SR
2
system.
Torque Control (enable/disable)
When this box is unchecked, the SR
2
system is not active. At this time, make sure the “Torque Control
Enable” check box is not checked.
Next, go to “Boost” along the main BigComm toolbar, as shown below. Click on “Boost Parameters” in the
drop down.