Multiquip DCA20SPXU2D - Manual (Page 32)

PAGE 32 — DCA20SPXU2D 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/25/11)
GENERATOR SHUT-DOWN PROCEDURES
NORMAL SHUTDOWN PROCEDURE
To shutdown the generator, use the following procedure:
1. Place the main, G.F.C.I., and aux. circuit breakers
(Figure 31) in the OFF position.
Figure 31. Main, Aux. and GFCI
Circuit Breakers (OFF
2. Let the engine cool by running it at low speed for 3-5
minutes with no load applied.
3. Press the OFF button (Figure 32) on the Digital
Controller to shutdown the engine.
Figure 32. OFF Button
4. Place the control power switch on the control panel
(Figure 33) in the OFFposition.
Figure 33. Control Power Switch (OFF)
WARNING
NEVER stop the engine suddenly except in an
emergency.
OFF
EMERGENCY SHUTDOWN PROCEDURE
1. Place the main, G.F.C.I., and aux. circuit breakers
(Figure 31) in the OFF position.
2. Press the OFF button (Figure 32) on the Digital
Controller to shutdown the engine.