Multiquip WM63h8 - Manual (Page 40)

page 40 — wm63-series mixer • operaTion and parTs manual — rev. #0 (09/27/12)
naMeplate and decals
MODEL
SERIAL
P/N 521232
CAUTION
1. Use manufacturer’s recommended torque values
when tightening wheel lug nuts.
2. Use recommended tire pressure
values when inflating tires. exceed
recommended tire pressure.
manufacturer’s
DO NOT
INSPECT BEFORE TOWING
TIGHTNESS OF WHEEL NUTS
TIRE PRESSURE
Keep safety grate, guards and doors
in place. Shut off engine or electric
motor before inspection or maintenance.
Moving parts can cut and crush.
engine or electric motor
before placing hands in mixing drum.
SHUT OFF
This machine to be operated by qualified
personnel only. Ask for training as needed.
P/N 521229
WARNING
To avoid injury, you read and
understand operator’s manual before
using this machine.
MUST
P/N 521230
Crush hazard area keep hands and fingers
Clear of safety grate at all times.
Stand clear of dump handle handle kick-back
Is possible.
Wear appropriate dust mask head, hearing and
Eye protection when operating this equipment.
Moving parts can crush and cut.
Do not operate with guard removed
Follow lockout procedure before servicing.
6
10
SAFETY
INSTRUCTIONS
P/N 520935
1. Read owner’s manual
before operating.
2. Keep unauthorized and untrained
people away from machine during
operation.
3. Make sure all safety devices are in
place before this machine is started.
4. Make sure engine is turned off and
spark plug wire is disconnected before
cleaning the machine.
5. Keep hands and fingers away from
moving objects.
6. Do not operate machine in an enclosed
area, proper ventilation is required.
7. Never leave machine unattended when
operating.
8. Always stop engine and allow engine
to cool before adding fuel or oil.
EM948630
PUSH
TO STOP
1
7
8
11
3
5
DANGER
Gasoline is highly flammable .
DO NOT smoke around or near the equipment.
Fire or explosion could result from fuel vapors or
if fuel is spilled on a engine! hot
P/N 521228
2
4
4
CIP?????
CAUTION
LEGEND
REPRESENTS LOCK PIN
REPRESENTS DRUM STOP BLOCK
MIX TOW
DRUM LOCK POSITIONING
SEE OPERATION MANUAL FOR PROPER DRUM LOCK POSITIONING
9
WARNING
Keep safety grate, guards and doors
in place. Shut off engine or electric
motor before inspection or maintenance.
Moving parts can cut and crush.
engine or electric motor
before placing hands in mixing drum.
SHUT OFF
This machine to be operated by qualified
personnel only. Ask for training as needed.
P/N 521229
WARNING
To avoid injury, you read and
understand operator’s manual before
using this machine.
MUST
3