MTS Triaxial Cell Models 656-06 - Manual (Page 62)

18. Wipe the platen assembly free of debris. Make sure debris is removed from feedthrough holes and bell
seal screw holes.
Clean the Assembly Platen
Changing Between Extension/Pore Pressure
and Compression Test Setups
This section explains how to change your Triaxial Cell between a setup ready to run pore pressure/extension
tests to one ready to run compression tests.
Changing to a Compression Test Setup tells what you must do to go from an extension or pore pressure
test setup to a compression test setup.
Changing to an Extension/Pore Pressure Test Setup tells what you must do to go from a compression
test setup to an extension or pore pressure test setup.
62 | Triaxial Cell Product Information
Operation