MTS Series 685 Hydraulic Grip Supply - Manual (Page 28)

Series 685 Grip Supply Product Information 28
Lifting and Moving the Grip Supply
Installation
1. Unpack the grip supply.
A. Remove the grip supply from the shipping container (if used).
B. Remove any protective wrapping.
C. Use a clean cloth to wipe dust or debris deposited during shipment.
2. Inspect the grip supply for shipping damage.
Look for the following:
• Scratches in the grip supply
• Damaged electrical connections
• Damaged hydraulic connections
• Dents and other structural damage
Report any damage found to both the carrier and MTS. In the U.S. and
Canada, call the MTS Call Center at 1-800-328-2255. Elsewhere, contact
your local MTS office.
3. Before you move the grip supply, check the following:
• The floor where the grip supply will sit can bear its weight.
• The path to where the grip supply will sit is clear and uncluttered.
• Plan a route that will accommodate the dimensions of the grip supply
with extra space for clearance through doors, hallways, and so forth.
• The area where the grip supply will sit is clean and well lit, with all
hoses and cables moved out of the way.