MTS Series FEC Environmental Chamber - Manual (Page 35)

Temperature Controller Common Functions
Series FEC Environmental Chamber Product Manual Operation 35
Temperature Controller Common Functions
The Environmental Chamber uses a Eurotherm2408 as temperature controller.
The following describes the operation of manual settings and some of its
methods and procedures.
For details relating to setting test temperature and various control parameters,
refer to"Eurotherm Manual". For setting test temperature and control parameters
via software, refer to the attached software application manual.
1. Setting test temperature:
Press or key directly to adjust the temperature
.
2. Setting PID control parameters:
PID control parameters are the key parameters to control the temperature.
Generally, different temperatures require different PID parameters. When
setting the temperature, refer to the corresponding information to enter the
correct parameters. Based on parameters tables given in the Eurotherm
manual to set three parameters, Pb (P parameter), ti (I parameter), and td (D
parameter). The following flow chart briefly illustrates the methods to set
the three parameters (PID).
Temperature Indicating
Value
Temperature Setting
Value
Arrow keys are used for
setting temperature and
parameters.