Metal Sales IMPower Series - Manual (Page 12)

© Metal Sales Manufacturing Corporation / Subject to change without notice 1/14
11
IMPower Series
TM
Secondary framing
(not by Metal Sales)
Butyl sealant at vertical joint
"WC-01" Panel Clip w/
1 /
4
- 14 x Tek 3 fasteners
w/o washer per support
NOTE: General details shown. Refer to shop
drawings for project-specific details.
NOTE: Fill panel exterior cavity with 1/2" diameter
bead (approximate) of non-skinning butyl sealant
(do not under fill).
PANEL INSTALLATION DETAILS
Exterior Side
"WC-01" Orientation
Interior Side
Field applied non-skinning butyl sealant
"WC-01" Panel Clip w/
1 /
4
- 14 x Tek 3 fasteners
w/o washer per support
NOTE: General details shown. Refer to shop
drawings for project-specific details.
NOTE: Fastening schedule may very depending
on specific applications.
INTERMEDIATE SUPPORT
PANEL JOINT
DETAIL 1
DETAIL 2